Potenciômetros programáveis ACCU-TACH e ACCU-DIAL
Potenciômetros programáveis ACCU-TACH e ACCU-DIAL
ESPECIFICAÇÕES TÉCNICAS
- Built-in 10k ohm potentiometer connects to device’s set point adjustment potentiometer terminals;
- Sets the operating point voltage;
- Accu-Dial — LCD displays potentiometer position in User Units;
- Accu-Tach — LCD displays feedback in User Units.
- LCD range of 0.000 to 9,999 for decimal-based User Units;
- LCD range of 59.59 to 00.00 for time-based units (ie. hours.minutes or minutes.seconds);
- Accu-Dial — potentiometer position measured with 12 bits of resolution;
- Accu-Tach — measures encoder frequencies from 0.500 Hz up to 9999 Hz to within 0.2% of actual frequency;
- EEPROM protects variable programming and calibration settings through power cycles;
- Lockout function prevents inadvertent changes to calibration settings.
- Mounts through control panel via single 3/8” diameter hole;
- Footprint of 1.95” x 3.10”;
- Enclosure made of injection molded ABS plastic with a plastic backplate.
- Carcaça NEMA 4 (IP66);
- Temperature range of 0 °C to 60 °C;
- Humidity of 0-90% non-condensing.
- Built-in 10k ohm potentiometer (sets operating point voltage);
- Two push-buttons (to access variable programming calibration mode).
- User Units display mode;
- Variable programming – calibration mode.
CENTRAL DE INFORMAÇÕES E DOWNLOADS
Aviso
Você pode solicitar no módulo abaixo um orçamento e também uma videoconferência.
ORÇAMENTO
ORÇAMENTO
Ficou interessado? Ligue:
11 4497-1735